To realise the new CIP (clean in place) system, FrieslandCampina approached Gpi with a quotation request for four stainless steel tanks, namely two 290 m3 water tanks and two 70 m3 chemical tanks.
The coronavirus pandemic prompted one pharmaceutical company to look for a new solvent tank for its COVID-19 vaccine.
Gpi Tanks engineered and manufactured twenty-seven stainless steel storage tanks for a well-renowned company which stores and mixes edible oils and fats and provides filling services.
Westfort put out a call for three tanks designed to store water heated without the use of gas for their sustainable expansion programme.
The job consisted of the engineering and construction of 4 vertical tanks for the storage of raw fish, each with a volume of 560m3.
The transport of two stainless steel tanks in the Wrocław region of Poland has caused quite a stir. It was not only their size that caught the imagination, but careful planning of the route and the loading, transportation and installation of the tanks too.
Epax needed a large stainless steel storage tank of 1295 m3 and Gpi was able to deliver relatively quickly.
60 mobile pressure tanks for the production of particulate filters NGK Ceramics Polska produces DPFs – diesel particulate filters. As part of the production line for
In order to produce cheese from GMO-free milk, as well as from its other milks, extra capacity was required. As a result new milk tanks were needed for Royal Bel Leerdammer.
E&A Scheer B.V. from Amsterdam has been in the rum trade for over two and a half centuries. Gpi supplied 58 new stainless steel tanks to E&A Scheer.
Gpi Tanks designed and produced six stainless steel tanks for our client specializing in the production of calcium carbonate pigments, fillers and granules of the highest quality.
Gpi Tanks engineered and manufactured four stainless steel tanks for a major Circular Steam Project. With this project our customer invests in an innovative technology to convert water-based waste into energy.
Haacht Brewery, based in Belgium, is a family-owned brewery which was founded in 1898. Gpi received the order to supply 4 vertical beer tanks – so-called cylindrical conical tanks (CCTs) – each with a capacity for 520 hl.
“We see Gpi as a professional party that has been making its mark for years. The people at Gpi are good listeners. We can rely on them to deliver high-quality tanks of all shapes and sizes at short notice.
“Gpi certainly pulled out all the stops. They were really keen to win this contract. And they succeeded, mainly because they showed they understood the picture in every detail.“
Van Zutven came to Gpi with an impossible request: the silos, which were ordered in April 2018, had to be delivered in June/July, otherwise the construction of the silo hall would stagnate.
Browar PINTA recently purchased 10 cylindrical conical beer tanks (CCT) from Gpi with a capacity of 100 hl (5 tanks), 200 hl (4 tanks) and 50 hl (1 tank) respectively. The order also included 2 bright beer tanks (BBT), each with a capacity of 195 hl.
Gpi recently delivered new stainless steel milk tanks of 250 m3 and 300 m3, an expansion that makes production planning a lot easier.
Gpi recently had the honour of supplying two stainless steel water tanks for a very unusual project. These will be used as training tanks for rescue divers.
Gpi has constructed an on-site tank for USG Geleen with a capacity of no less than 7300m3. The tank has been designed to EN 14015, the European norm for flat-bottomed tanks.
Gpi has build a 3995m3 demineralised watertank on site for Dow Chemicals in Terneuzen according to API650 guidelines.
Gpi has build a 3995m3 demiwatertank for its customer, Dow Chemicals, on site. The tank is designed and build according to API650 guidelines.
Gpi supplied a 200m3 storage tank for its customer in the biomass industry. The double-walled tank is made of stainless steel 316Ti.
Gpi has supplied 2-site constructed tanks for a customer in the chemical sector. Both tanks are made of Duplex 2205.
Gpi has delivered 3 tanks of 300m3 for Royal Bel Leerdammer. The tanks will be used for storage of whey milk.
Gpi has designed and built a complete batterline installation with Kiremko.
4 storage tanks for the demiwater factory of Evides Industry water have been placed end of March.
Gpi has delivered 4x 30m³ tanks for one of its clients in the food-processing industry. These tanks are designed for the processing of cocoa mass. Cocoa mass is the basis for various chocolate products for both the food industry and consumers.
Gpi provided Smilde Foods with 40 storage tanks for the storage of plant-based oils and fats.
Gpi delivered 10 x 60 litre vessels for a client in the pharmaceutical industry. Our client specialises in translational vaccine technology. The vessels are designed for waste fluid, and have a small radius so that they can easily be moved.
The client requested three storage tanks that had to comply with the KIWA BRL-K756 directive. The three storage tanks have a capacity of 45,000 litres each, and are to be used for the storage of formic acid, lactic acid and Sal CURB. Sal CURB is a mixture of fluid formaldehyde and organic acids.
Gpi produced four mobile pressure tanks for a cosmetics company which operates on a global basis. The tanks are to be used in order to transport make-up from the production kettle to the filling machine in bulk, in order to carry out the filling process there.
Gpi provided two large storage tanks for an oleochemical manufacturer in Gouda. Each of the storage tanks has a capacity of 3.500m³. The tanks were transported upright from their production location of Groot-Ammers to the client’s factory in Gouda.
Gpi delivered one of its largest orders in the form of a complete tank park for a new powdered milk factory in Gorinchem, belonging to Vreugdenhil Dairy Foods.
The project consisted of 27 tanks with a total capacity of 5 million litres.
