Gpi recently received an order from an existing customer in the biogas industry for the production of four glycol storage tanks.
Vertical Storage Tanks
Stainless steel tanks of up to 15,000 m3
Gpi manufactures stainless steel storage tanks from a capacity of 500 l up to 15,000 m³. Depending on the destination, we can build the tanks in our factory in Lopik, in our factory in Groot-Ammers, or construct them on-location. We produce high-grade tanks and storage tanks up to a diameter of 6 m at our Lopik facility. From there, we can reach most locations quickly by road. If the tank cannot be transported by road, we often create storage tanks at our location in Groot Ammers. This factory is located right on the banks of the river Lek, allowing us to transport the tanks via water.
If delivery of the tank is impossible, we are also able to construct tanks with a diameter of up to 30 m and a height of up to 30 m on location. For this, we often use our Coil Building system, which ensures highly-efficient manufacture and high-quality tanks.
- Pressure Vessel from 0,5 bar
- Complies with PED
- Calculations acc. to EN13445 or AD2000
- Inspection opening mandatory: Hand-, peep-, manhole
- If needed: Design assessment and FAT with NoBo
Do you have any questions about our storage tanks?
E&A Scheer B.V. from Amsterdam has been in the rum trade for over two and a half centuries. Gpi supplied 58 new stainless steel tanks to E&A Scheer.
Gpi Tanks engineered and manufactured four stainless steel tanks for a major Circular Steam Project. With this project our customer invests in an innovative technology to convert water-based waste into energy.
“We see Gpi as a professional party that has been making its mark for years. The people at Gpi are good listeners. We can rely on them to deliver high-quality tanks of all shapes and sizes at short notice.
“Gpi certainly pulled out all the stops. They were really keen to win this contract. And they succeeded, mainly because they showed they understood the picture in every detail.“
Browar PINTA recently purchased 10 cylindrical conical beer tanks (CCT) from Gpi with a capacity of 100 hl (5 tanks), 200 hl (4 tanks) and 50 hl (1 tank) respectively. The order also included 2 bright beer tanks (BBT), each with a capacity of 195 hl.
Gpi recently delivered new stainless steel milk tanks of 250 m3 and 300 m3, an expansion that makes production planning a lot easier.
Gpi recently had the honour of supplying two stainless steel water tanks for a very unusual project. These will be used as training tanks for rescue divers.
Gpi has constructed an on-site tank for USG Geleen with a capacity of no less than 7300m3. The tank has been designed to EN 14015, the European norm for flat-bottomed tanks.
Gpi has build a 3995m3 demiwatertank for its customer, Dow Chemicals, on site. The tank is designed and build according to API650 guidelines.